FLYWHEEL NOT INCLUDED


--------------------------------FREE SHIPPING TO THE LOWER 48!!!--------------------------------
---Orders for kits to be used with the stock dual mass flywheel will use a non-oem rigid disc, which can cause extra gear noise. Please specify what flywheel you will be using with your clutch kit---

Kits include pressure plate, disc, and throwout bearing (with concentric slave cylinder)

--------------------------------------------------------------------------------------------------

---THESE CLUTCHES ARE CUSTOM MADE FOR US BY TCS*. PLEASE ALLOW UP TO 5 BUSINESS DAYS TO SHIP---




TC100 - $475.00 FREE SHIPPING
Consists of a heavy duty pressure plate, organic steel backed disc, and throwout bearing (with concentric slave cylinder)
Power Rating: 300-325whp

--------------------------------------------------------------------------------------------------




TC200 - $575.00 FREE SHIPPING
Consists of a heavy duty pressure plate, segmented Kevlar disc, and throwout bearing (with concentric slave cylinder). The Kevlar offers excellent holding power, and when broken in properly will last an extremely long time. And since it is segmented, the clamping force is further increased.
Power Rating: 400-450whp

--------------------------------------------------------------------------------------------------

FLYWHEEL NOT INCLUDED

TC300 - $565.00 FREE SHIPPING
Consists of a heavy duty pressure plate, dual fricion disc (Aramid fiber on one side, ceramic on the other), and throwout bearing (with concentric slave cylinder). This kit will provide even more holding power than the TC100 & -200, but will engage smoother than the TC400.
Power Rating: 425-475whp

--------------------------------------------------------------------------------------------------




TC400 - $550.00 FREE SHIPPING
Consists of a heavy duty pressure plate, 4 puck ceramic disc, and throwout bearing (with concentric slave cylinder).
Power Rating: 500-550whp

UNSPRUNG DISCS ARE ALSO AVAILABLE ***RACE USE ONLY***

-----------------------------------------------LIGHTWEIGHT FLYWHEELS-----------------------------------------------



Autotech 240mm Lightweight Aluminum Flywheels for 02M 6-Speed - $395.00 + shipping 

Autotech's CNC machined 240mm Aluminum Flywheels are crafted from 6061 aluminum blanks.These Aluminum Flywheels are different from the competition because they are NOT simply built to be the lightest flywheels on the planet, sacrificing all for bragging rights to the lightest VW flywheel made… Some of the competition's ultra lightweight aluminum flywheels can actually be too light. There are a few downsides to this, most notably: making it difficult to get the car rolling (no inertia!) from a standstill.

Autotech has optimized the design to benefit from added inertial drop without throwing the drivability out the window at the same time, a common shortcoming of many other aluminum flywheels. These 240mm Aluminum Flywheels weigh just over 9 lbs. with the starter ring gear installed. The friction surface is high quality, alloy steel that is treated with a liquid nitriding process called Melonite®. The Melonite® process minimizes distortion and keeps dimensional changes to a minimum, while drastically increasing fatigue strength. As a result, the friction ring exhibits exceptional long-term resistance to wear, seizure, scuffing, adhesion and fatigue.

Autotechs' 240mm Aluminum Flywheels include new starter ring gear, flywheel & pressure plate bolts. It is designed to work and has been extensively tested with stock & competition pressure plates and discs.




Fidanza Aluminum Flywheel 24 valve VR6 - $390.00 + shipping
EXTRA SHIPPING TIME MAY BE NECESSARY - CONTACT FOR MORE INFO

-9 pounds
-Military spec quality fasteners
-1045 steel replaceable friction plate
-1050 heat treated steel ring gear
-6061 T6 aluminum body

--------------------------------------------------------------------------------------------------


*Tampa Clutch Supply (TCS) is a clutch shop in Tampa, Florida. Since, 1982, they have been providing spectacular service that only a clutch-specific shop can offer. From rebuilding any clutch system, to new High Performance kits, they do it all. Tampa Clutch Supply has their own custom built clutches in some of the most powerful cars in the southeast, and also made clutches for the infamous Lingenfelter Corvettes. Here are some links to their feedback:
(The shop was originally named Bay City Clutch, or BCC)

http://tampabay.dsm.org/phpBB/...+city

http://tampabay.dsm.org/phpBB/...+city

http://www.tamparacing.com/for....html



**Georgia residents add 7% sales tax**

Prices that include shipping are to the lower 48 states. To ship to other areas, contact us. As stated above, the TCS clutch kits are custom made, so please allow up to 5 business days for them to ship. Payments are made by credit card or Paypal. To order or if you have any questions, don't hesitate to contact us here or:

AIM ID - FarinaMotorsport
Phone - 706-565-0110
Email - sales@farinamotorsports.com


Thanks for looking!